Smooth-On Rebound 40 Brush-On Silicone Rubber - Trial Unit (2 lb)

Rebound™ 40 is a self-thickening platinum silicone that you brush on instead of pour. Four thin coats make a strong, durable mold of big or vertical pieces (sculptures, architectural details, props) with far less rubber than a poured block mold. It's on the firmer side (40A) and can be layered with Rebound 25.

Specs:

• Mix ratio: 1A:1B by weight or volume
• Pot life: 20 minutes
• Cure time: 6 hours
• Shore hardness: 40A
• Mixed viscosity: Brushable
• Color: Green

Won't cure against sulfur-based modeling clays; test first if you're not sure.

Trial unit: 2 lb total (1 lb Part A + 1 lb Part B), about 52 cubic inches of rubber. Color it with Silc Pig™ pigments.

Use in a well-ventilated area and wear vinyl gloves (latex gloves stop platinum silicone from curing). Store and use at room temperature (73°F / 23°C). Packaging may vary.