Smooth-On XTC-3D 3D Print Coating

XTC-3D™ is a brush-on epoxy coating that fills in the layer lines on 3D prints and leaves a smooth, high-gloss finish, cutting out most of the sanding. It self-levels, works on PLA, ABS, SLA and powder prints as well as wood, paper and foam, and can be tinted with UVO™ or IGNITE™ colorants.

Specs:

• Mix ratio: 2A:1B by volume (100A:42B by weight)
• Pot life: 10 minutes
• Hardness: Shore 80D
• Mixed viscosity: 350 cps
• Coverage: 1 oz covers about 100 sq. in.
• Color: Clear

Use in a well-ventilated area and wear gloves. Store and use at room temperature (73°F / 23°C).